Betriebsgeräte
3-Channel Constant Power Driver for Deutsche Bahn
The SUSCON DR-150.3.B.0042-PV was specially developed for Deutsche Bahn and is certified and approved by DB. With 150 W rated power, 6 KV surge protection, IP65 ingress protection and galvanic isolation, it meets the stringent requirements of railway lighting.
/ Constant Power
Precise Constant Power Regulation
- 3 independent channels, each max. 50 W
- Output power adjustable from 5–150 W
- Output current tolerance ±5 %
- Galvanic isolation (SELV)
/ Cost Efficiency
Fewer track closures thanks to
- 100,000 h lifespan (at 25 °C) — reduces maintenance intervals in railway installations
- 10-year warranty — covers typical DB maintenance cycles
- Electrical efficiency ≥87 % at full load, power factor ≥0.95
- 6 KV surge protection — fewer unplanned failures due to mains fluctuations
- Pre-assembled cables and connectors — short replacement times on site
/ Technische Daten
Technical data in detail
| Grunddaten | |
| Nennleistung | 150 W |
| Leistungsbereich | 5–150 W (regelbar, 3 Kanäle à max. 50 W) |
| Max. Gesamtleistung | 165 W |
| Min. Leistungsaufnahme | 1-Kanal: 11,5 W · 3-Kanal: 29,7 W (bei je 5 W Ausgang) |
| Schutzart | IP65 |
| Überspannungsschutz | 6 KV |
| Garantie | 10 Jahre |
| Elektrische Daten | |
| Nennspannung | 230 V |
| Eingangsspannung AC | 198–264 V |
| Netzfrequenz | 50–60 Hz |
| Nennstrom | 0,9 A |
| Oberschwingungsgehalt (THD) | Volllast: ≤10 % · Halblast: ≤20 % |
| Netzleistungsfaktor | ≥0,95 (Volllast) |
| Elektrische Effizienz | ≥87 % (Volllast) |
| Einschaltstrom | < 15 A / 2 ms |
| Verhältnis Einschalt-/Nennstrom | < 17 |
| Berührungsstrom | < 0,75 mA pk |
| Nennausgangsspannung | 30–50 V |
| Max. Ausgangsspannung | 60 V |
| Ausgangsstrom | max. 1000 mA (3 Kanäle) |
| Ausgangsstromtoleranz | ± 5 % |
| Rippelspannung | ± 5 % |
| Galvanische Trennung | ja (SELV) |
| Leitungsschutzschalter | B10: 5 · B16: 7 · C10: 7 · C16: 12 |
| Betrieb & Lebensdauer | |
| Umgebungstemperatur | −25 bis +50 °C |
| Max. Temperatur am tc-Punkt | 82,5 °C |
| Schaltzyklen | > 100.000 |
| Lebensdauer | 100.000 Std. (25 °C) · 50.000 Std. (45 °C) |
| Schutzfunktionen | Überlast, Kurzschluss, Übertemperatur |
| Mechanik | |
| Abmessungen (L × B × H) | 220 × 115 × 36,5 mm |
| Gewicht | 1450 g |
| Befestigung | Montageschrauben |
| Kompatibilität | |
| Lampen-Schutzklasse | SK II / SK III |
| Kabeltyp Eingang | Ölflex Classic 110, 2 × 1,0 mm² |
| Kabellänge Eingang | 1000 mm |
| Kabeltyp Ausgang | Ölflex Classic 110, 7 × 1,0 mm² |
| Kabellänge Ausgang | 400 mm |
| Anschlusstechnik Ausgang | Binder RD 24, Serie 692/693, 6+PE |
/ Compatibility
Compatible with DB infrastructure
Designed for use in railway lighting: the output-side Binder RD24 connector is an established standard in railway engineering and enables direct integration into existing DB luminaires. Pre-assembled Ölflex cables (input 1000 mm, output 400 mm) reduce installation and maintenance time on site.
- Binder RD24 connector (series 692/693, 6+PE) — standard railway connection type
- Suitable for luminaires of protection class II and III
- Output voltage 30–50 V, max. 60 V
- Max. output current 1000 mA for three channels
- Input voltage 198–264 V AC, 50–60 Hz
- Galvanic isolation (SELV) for safe operating conditions
/ Installation
Maintenance-friendly replacement in railway installations
The driver is supplied with pre-assembled Ölflex cables — no cutting or crimping required on site. The standard railway Binder RD24 connector allows connection without specialist tools. With IP65 ingress protection and a wide temperature range (−25 to +50 °C), the unit is also suitable for outdoor areas and non-climate-controlled platform lighting.
Secure the driver inside the luminaire using mounting screws (220 × 115 × 36.5 mm)
Connect the pre-assembled input cable (Ölflex, 1000 mm) to the 230 V mains supply
Connect the output cable (400 mm) to the LED modules via the Binder RD24 connector