LA-19.27.170.360.N.502-PV
- Rated power (ECG)
- 19 W
- Rated power (direct)
- 15 W
- Luminous flux
- 2185 lm
- Luminous efficacy (ECG)
- 115 lm/W
View details
Back to Solutions
Retrofit-Lampen
G24Q LED Retrofit Lamp 1:1 swap without rewiring
The G24Q LED Retrofit Lamp replaces compact fluorescent lamps in existing G24q sockets — without rewiring the luminaire. It works immediately with the existing OSRAM QTP-M, the standard ECG in municipal and public buildings. Alternatively, direct operation at 220–240 V AC is possible. Two power variants with 2185 lm and 3045 lm available.
/ Lighting Technology
Lighting Characteristics
- 2700 K warm white, CRI >80
- Up to 179 lm/W in direct operation
- Flicker-free
- L80 B10 = 50,000 h lifetime
/ Cost Efficiency
Pays for itself from the
- No rewiring costs — for large building portfolios, the biggest cost factor of retrofitting is eliminated
- Up to 179 lm/W luminous efficacy in direct operation — significantly lower energy consumption than conventional compact fluorescent lamps
- 50,000 hours lifetime (L80 B10) — fewer lamp replacements, lower maintenance costs
- 5-year warranty
- Integrated over-temperature protection
Versions side by side
2 versions. Click a column for full specs and datasheet.
/ Compatibility
Fits into existing G24Q sockets
Simply swap the lamp — the existing wiring and the installed ECG remain unchanged. No luminaire modification, no rewiring. In the event of a later ECG failure, switching to direct operation is possible.
- G24q-3 base — direct installation in existing sockets
- Compatible with the OSRAM QTP-M, the standard ECG in municipal facilities — no rewiring required
- Alternatively, direct operation at 220–240 V AC possible
- Not dimmable
- Operating range from -20 to +45 °C ambient temperature
/ Installation
Swap the lamp, done
In ECG operation, a simple lamp swap is all it takes: remove the old compact fluorescent lamp, insert the G24Q LED Retrofit Lamp. No rewiring, no luminaire modification. Intervention in the wiring is only required if direct operation is desired.
1
Disconnect mains voltage and remove the old compact fluorescent lamp from the G24q socket
2
Insert the G24Q LED Retrofit Lamp — with an existing ECG (e.g. OSRAM QTP-M), the swap is complete
3
Optional for direct operation: bypass the ECG and connect to 220–240 V AC mains (by a qualified electrician)